SWEP · Heating system
B85
Brazed plate heat exchanger
Choose a size
The B85 is a brazed plate heat exchanger from SWEP with large ports, up to 160 plates and a 17 m³/h maximum flow. It has higher thermal performance than comparable products and suits high-power condensers and heavy heat transfer.
- Large ports for high flow, up to 17 m³/h
- Up to 160 plates, the most in the line
- A condenser for high power and heavy heat transfer
- More connection types: Victaulic, weld, hose and more
Sizes and dimensions
The B85 comes with up to 160 plates. Drag the slider to see how the size and weight change with the number of plates.
Connection options
Other connections and special dimensions are available on request.
Threaded connection
Threaded (Ultra High Approved)
Victaulic connection
Solder connection
Combo connection
Hose connection
Weld connection
Pressure and temperature
The maximum pressure falls as the temperature rises. Drag the slider to see the design pressure (PED) in each circuit at any temperature.
Temperature
20 °C
Circuit 1
53 bar
Circuit 2
39 bar
Click the chart or drag the slider to pick a temperature.
Material, cleaning and durability
The plates are 316/316L stainless steel brazed together with copper. The largest particle allowed in the fluid is only 0.8 mm, so a filter ahead of the exchanger matters a lot. It has no gaskets and usually needs no maintenance. If dirt builds up it can be cleaned in place (CIP).
Product details
- Maximum flow
17 m³/h
- Material
316/316L stainless steel, copper-brazed
- Design pressure (PED)
About 53 bar in circuit 1 and 39 bar in circuit 2 at room temperature
- Weight without connections
2.09 + 0.1367 × NoP kg
- Maximum number of plates (NoP)
160
- Channel volume
0.094 dm³ per side
- Thickness (F)
4.00 + 1.84 × NoP mm
- Dimensions (height × width)
526 × 119 mm
- Maximum particle size
0.8 mm
- Approvals
PED (Europe), UL (USA), KHK (Japan)
Similar products
We work out the right size with you
Which exchanger fits depends on the job, the temperatures and the flow. Send us the details and we will find the right size, most often from what we have in stock.
Get in touchIt helps if you send us:
- What it is for: heating, tap water, snow melting …
- The power (kW), or the size of the house or area.
- The district heating temperature.
- Temperature and flow on both sides, if you know them.
- Which exchanger is in use today, if you are replacing one.